RG-S5750C-28GT4XS-H

Thiết bị chuyển mạng switch RG-S5750C-28GT4XS-H

Chi tiết sản phẩm

Model RG-S5750C-28GT4XS-H
CPU Dual-core with each 1.0 GHz
BOOTROM 8 MB
Flash Memory 512 MB
SDRAM 1 GB
Optical Module See Appendix B.

The supported module type may change at any time. Consult Ruijie Networks for the latest information.

Expansion Module Slot l  2 slots

l  Supported expansion module: M5000H-01QXS (for stack), M5000H-MSC (multiple service cards)

Power Module Slot l  2 slots

l  Supported power module: RG-PA70I

l  AC input:

Rated voltage: 100V to 240V

Maximum voltage: 90V to 264V

Frequency: 50/60 Hz

Rated current per input: 2A

l  HVDC input:

Rated voltage: 120V to 340V

Maximum voltage: 110V to 380V

Rated current per input: 2A

 

l  Supported power module: RG-PD70I

DC input:

Rated voltage: -36V to -72V

Rated current per input: 3.15A

SFP Port 1000Base-X

100Base-X

SFP+ Port 10GBase-R

1000Base-X

Power Consumption <45W (without expansion modules)
Temperature Operating temperature: 0 ºC to 50ºC

Storage temperature: -40 ºC to 70ºC

Humidity Operating humidity: 10% to 90% RH

Storage humidity: 5% to 95% RH

Altitude 0 to 5000m
Fan Speed adjustment and fault alarm
Temperature Alarm Supported
EMI Standard GB9254-2008CLASS A
Safety Standard GB4943-2011
Dimensions

(W x D x H)

440 mm x 280 mm x 44 mm
Weight 3.9 kg

Product Appearance

The RG-S5750C-28GT4XS-H Ethernet switch provides 28 10/100/1000Base-T Ethernet ports, 4 GE SFP combo ports, 4 10GE SFP+ ports, 1 MGMT port, 1 USB port, 1 Mini USB port, and 1 Console port on the front panel, as well as 2 power module slots and 2 expansion module slots on the back panel (The Console and Mini USB ports are a combo Console port. When they are connected meanwhile, the Mini USB port takes the precedence).

Figure 1-1 Appearance of RG-S5750C-28GT4XS-H

Front Panel

Figure 1-2 Front Panel of RG-S5750C-28GT4XS-H

Note: 1. System status LED

2. Power status LED (PWR1)

3. Power status LED (PWR2)

4. MGMT port status LED

5. Console port

6. 10/100/1000 Base-T  Ethernet port

7. Switch port status LED

8. USB port

9. Mini USB port

10. MGMT port

11. GE SFP port

12. 10GE SFP+ port

Back Panel

Figure 1-3 Back Panel of RG-S5750C-28GT4XS-H

Note: 1. Grounding connector

2. Expansion module slot 1

3. Expansion module slot 2

4. Power module slot 1

5. Power module slot 2

Power Supply

RG-S5750C-28GT4XS-H supports 2 power modules. For details, see the section “Power Modules”.

Dual-power input: The switch can be powered by one power module, or two power modules. When both two modules are available, the switch is powered in current sharing mode.

     When the switch is powered by the dual-power modules, if the system working power is greater than the capacity of single power module, power redundancy cannot work; if one power module fails, the switch system will be affected.

Heat Dissipation

The RG-S5750C-28GT4XS-H is designed with left and right fans for heat dissipation, thereby ensuring the normal function of the device in the specified environment. Maintain a minimum clearance of 10cm around the chassis to allow air circulation.

Figure 1-4 Flow Scheme of Heat Dissipation

LED

LED Panel Identification State Meaning
System status LED Status Off The switch is not receiving power.
Blinking green

(3 Hz)

The switch is being initialized with 3Hz blinking.

Continuous blinking indicates errors.

Blinking green (10Hz) Supports remote on/off to locate the switch.
Solid green The switch is operational.
Solid yellow Temperature alarm:

1. Temperature of inlet/outlet air exceeds the normal operatingtemperature range.

2. The power supplies cannot support the whole system.

Check the working environment of the switch and power supplies immediately.

Solid red The switch is faulty. For details, see the chapter “Troubleshooting”.
Power status LED PWR1/PWR2 Off The power module is not in place or not receiving power.
Solid green The power module is connected and can supply power.
Solid yellow The power model is identified but not recognized.
Solid red The redundant power is faulty or the AC power cord is not connected.
MGMT port status LED MGMT Off The port is not connected.
Solid green The port is connected at 1000 Mbps.
Blinking green The port is receiving or transmitting traffic at 1000 Mbps.
Solid yellow The port is connected at 10/100 Mbps.
Blinking yellow The port is receiving or transmitting traffic at 10/100 Mbps.
10GE SFP+ port status LED 29F-32F Off The port is not connected.
Solid green The port is connected at 1/10 Gbps.
Blinking green The port is receiving or transmitting traffic at 1/10 Gbps.
GE SFP port status LED 25F-28F Off The port is not connected.
Solid green The port is connected at 1000 Mbps.
Blinking green The port is receiving or transmitting traffic at 1000 Mbps.
Solid yellow The port is connected at 100 Mbps.
Blinking yellow The port is receiving or transmitting traffic at 100 Mbps.
10/100/1000Base-T  Ethernet port status LED 1-28 Off The port is not connected.
Solid green The port is connected at 1000 Mbps.
Blinking green The port is receiving or transmitting traffic at 1000 Mbps.
Solid yellow The port is connected at 10/100 Mbps.
Blinking yellow The port is receiving or transmitting traffic at 10/100 Mbps.
© 2019 . Thiết kế Website bởi VietMoz.